Centrifugal Systems

Application Sectors

Ecology

Applicazioni nell'ecologia

The company manufactures polyvalent machines which are used in purification plants, in water treatment plants, in sludge dewatering and in sludge pre-thickening. On the operator panel you can switch from one mode to another, due to the advanced control software of the machine. The use of the centrifuge as a pre-thickener (reduction of the liquid inlet volume) doesn't require the use of equalisation tanks. The hydraulic capacity of the different machines types ranges from 6 m3/ h to 160 m3/h.

Table of the technical characteristics of the DECANTER GHT ecologic sector

Back to Top

Food sector

Food Sector

In this sector the decanters are utilized for the processing of agricultural products such as tomatoes, lemons, orange, kiwi and mangos. These machines are used when the separation of the pulp from the juice is needed, or in fruit juice preparation, when a better clarification of the juice is required. The hydraulic capacities of the different machine types varies from 6000 lit/h to 160000 lit/h.

Table of the technical characteristics of the Decanter GHT food sector

Back to Top

Chemical

Applicazioni chimiche

In the chemical sector the decanters are primarily used in the salt separation process.
The main characteristic is the employment of very resistant material - Duplex or Superduplex - for the protection of the solid and liquid discharges, the bowl and the scroll that comes into contact with aggressive components related to this application sector.

Table of the technical characteristics of the Decanter GHT chemical sector

Back to Top

Minery

The application of the GHT decanter in this sector offers excellent results. The machines are used in the solid/liquid separation inert material washing, material to be discarded in drilling / quarrying.

Table of the technical characteristics of the Decanter GHT minery sector

Back to Top

2/3 Phases Separation

Separazione 2/3 fasi

The Gennaretti products are used in all those applications in which the separation of three components is required, each one with a specific weight, as for example in oil treatments and in the refining of olive husk. The 3 phases separation takes place with a mechanism that enables to separate continuously in "liquid-liquid-solid" matters; further it's possible to adjust the levels of the two liquid phases and the solid phase. By means of decanter centrifugation, specifically in the oil treatment, the separation is realized in three phases, the oil, the water and the olive husk.

Table of the technical characteristics of the Decanter GHT 2/3 phases separation

Back to Top